簡單認識一下AGILOX ONE

Getting toKnow the AGILOX ONE

AGILOX ONE 小巧而敏捷，可以在狹窄的通道內運輸托盤。盡管自重只有 400 千克，但該物流機器人可以搬運重達一噸的貨物，并將其提升至 1000 毫米的高度。小而強是它的座右銘。提升概念是基于電力驅動的雙主軸。帶負載的最大行駛速度為 1.4 米/秒。該車專門為托盤、箱子和手推車等載重工具而開發。當然，更重要的是該產品符合所有相關標準和安全要求。

Small and maneuverable, the AGILOX ONE transports pallets even through the narrowest aisles. Despite its own weight of just 400 kg, the logistics robot can handle a load of up to one ton and lift it to a height of up to 1000 mm. Small yet powerful is the motto. The lifting concept is based on an electrically driven double spindle. The maximum driving speed with load is 1.4 m/s. The vehicle was specially developed for load carriers such as pallets, boxes and trolleys. Of course, the product complies with all relevant standards and safety requirements.

我們的 AGILOX ONE 看起來非常小巧、方便，但卻具有強大的性能。它是專為那些一方面需要堅固可靠的工業機器人，另一方面又希望不使用主機或導航輔助等復雜設備的客戶而開發的。AGILOX 使用二維激光掃描儀獨立繪制房間地圖，調試工程師只需對其進行幾步微調即可。在繪制地圖時，AGILOX 只需在室內進行一次人工引導，并記錄室內的所有導航輪廓，如機器、設備和物體。這意味著第一臺 AGILOX 可在幾小時內投入使用，任何其他車輛也可通過即插即用功能在幾分鐘內投入使用。因此，磁點等導航輔助工具已成為過去。AGILOX 開發的導航系統確定位置的精度為 +/- 3 毫米，可在沒有檢測到參照物的情況下獨立行駛100米。因此，即使在要求苛刻的生產環境中，該系統也是理想之選。

Our AGILOX ONE may look extremely compact and handy, but it provides a powerful performance. It was specially developed for customers who, on the one hand, need a robust, reliable industrial robot but, on the other hand, want to do without complicated equipment such as a host computer or navigation aids, etc. Using a 2D laser scanner, the AGILOX independently draws a map of the room, which only needs to be fine-tuned by the commissioning engineer in a few steps. To draw the map, the AGILOX is guided through the room only once by hand and records all navigation contours located in the room, such as machines, equipment and objects. This means that the first AGILOX can be put into operation within a few hours, and any additional vehicle within a few minutes via Plug & Play. Navigation aids such as magnetic dots etc. are thus a thing of the past. The navigation system developed by AGILOX can determine its position with an accuracy of +/- 3 mm and can drive "blind" for up to 100 m. This makes the system ideal even for demanding production environments.

可供選擇的部分產品

Available Products

AGILOX ONE可提供兩個版本：單剪或雙剪升降系統。

- ONE標準單剪可將1000kg的物體提升至最高500mm

- ONE雙剪可以將750kg的物體提升至最高1000mm

Our AGILOX ONE is available in two versions: with a single scissor lifting system or with a double scissor lifting system.

- With an electrically driven spindle, we rely on a powerful lifting system. The AGILOX ONE lifts 1,000 kg up to 500 mm in the standard version with a single scissor lift.

-With a double scissor lift, it is possible to lift 750 kg up to 1,000 mm.

ONE單剪

ONE雙剪